Could Coca Cola be an option for sticking prints to your 3D Printer?, at least that’s what I tested in the video in this article. The result might shock you!   We’ve all been there. Your 3D Print starts to lift at the corners and even slide of the print bed. You have the new […]

Read more

In general I think copper or metal materials are pretty cool! They really are made for creative finishes on 3D-prints. I decided to leave out any post-processing in this video and are now working on a new video that will include DIY-techniques and much more!  Also, you get 15% off Filamentive orders if you want […]

Read more

Learn more about Moisture in 3D Printing and how it affects you. When browsing around different 3D Print Facebook/G+ groups or just generally talking about 3D Printing you quite often come across failed 3D-prints.  A general reason seems to be moisture in 3D Printing filaments. Lets dig deeper to understand! Watch the video above before continuing. […]

Read more

The Review video is of course above, but the whole story can be read below. My experience with Type A Machines ProMatte is really good, and the whole company for that matter! The whole story started with me reaching out to Type A machines with some questions about the ProMatte material. I wanted to try […]

Read more

About Filamentive (their words) We only offer the best 3D printing consumables. We guarantee roundness of at least 95%, as well as ±0.05mm tolerances across our filament lines. Stringent quality control measures are implemented to ensure excellence. We have specific, regulated drying procedures for each material and all feedstock streams are proven 100% homogenous with […]

Read more

Currently I’m creating a comparison video of both ColorFabb and Proto-pasta filaments, focusing on the carbon fiber! Here we see the Flashforge finder doing its thing with the Proto-pasta HTPLA Carbon Fiber

Read more

The easy-to-use affordable 3D-printer? Let’s find out! FlashForge Finder It has a buildvolyme of 140x140x140mm (5,5×5,5×5,5″), runs PLA and have assisted leveling, filament monitoring and much more. More about the finder here: https://www.flashforge-eu.com  

Read more

Having a working nice looking valve to demonstrate how efficient 3D-printing can be. This was downloaded from GrabCad, uploaded into Autodesk Fusion 360 and then more or less 3D-printed without any adjustments. Perfect! Read more and buy (Europe): http://j.mp/FlashDream   Song: Aether – Wanderlust: http://youtu.be/SWybKt5J3Wg

Read more

Have you seen high-end 3D-printers bragging about using it’s powder to do “impossible” prints such as an wrench? Well, Daniel Norée knew that wasn’t an issue and made an 3D-printable wrench using only one extruder and FDM/FFF 3D-printing technology. Check out the model here, printed on the WanHao Duplicator 4S with PLA filament. Print the […]

Read more